wdh-site
Home wdh-site Industry Information wdh-site How to identify the quality of Belt Grinding Machine

How to identify the quality of Belt Grinding Machine

duhui 2022-02-25

About Belt Grinding Machine:

 

How to identify the quality of Belt Grinding Machine

There are not only many brands of belt sanders, but also many manufacturers, and the quality of belt sanders with different prices will also be different. So when we buy a belt machine, how should we determine the quality of the belt machine?

Identification of belt sander quality

1. Vibration problem: Some belt sanders are hung with abrasive belts. After starting the machine, the machine vibrates a lot. If it is not fixed, it will "run around"! What is the reason? The main reason is that the balance of the rotating wheel is not good! The rotating wheel has a rubber wheel, a guide wheel, and a motor pulley. One of the three rotating wheels has poor accuracy, poor balance, and poor machine jitter! Another reason is that the fitting clearance of the parts of the support wheel is too large, causing relative movement between the parts and vibration. Then, the motor is not fixed well, and it also produces vibration.

2. Noise problem: The noise is mainly due to the lack of rigidity of the base and supporting parts, and the excessive clearance of the matching parts (the processing equipment of some factories is very poor and backward, and the quality awareness is poor, the manufactured parts are very bad, and there is almost no matching tolerance. requirements!), the selection of low-quality bearings, the speed of the abrasive cloth belt is too fast, etc.

3. Life problems: some belt grinders break down after a short time. There are several reasons: the adjustment part is made of gray cast iron, and 45# carbon steel is not used for precision casting, or heat treatment is not carried out, the bearing quality is not good, and the lubrication is not good. Good, the spindle has not undergone modulation heat treatment, or the hardness of the treatment is too low or too high (too low is easy to wear, too high is easy to break), and the quality of the motor is not good.

4. Problems in use: The size and structure of the machine are very important. Better structure and scientific size are the keys to the efficiency of polishing workers.

Due to the continuous development of technologies such as belt grinding machines, the role of belt grinding machines in the metal processing industry has become irreplaceable. Metalworking tasks such as surface polishing, round polishing, dressing polishing and grinding, radius polishing, chamfering and deburring can be accomplished with the help of advanced belt polishing equipment. With a modular design, this can increase the flexibility of the equipment and reduce costs. Industrial batch processing companies place high demands on the flexibility of the equipment used. Using a modular technical solution can reduce production costs and save storage space in the production workshop. The return on investment of the equipment is also very high if only the components required for each processing step need to be added to the basic equipment.

Safety matters during the use of the belt sander

1. Keep the workplace clean. Accidents are most likely to occur when the belt sander is used in a messy place or on a workbench.

2. Pay attention to the environment of the workplace, and do not use the belt sander in a dark and wet place. The belt sander should not be exposed to rain. Do not use the belt sander in the presence of flammable liquid or combustible gas.

3. Children should not be allowed to approach, and idlers should be prohibited from entering the workplace, let alone touching the belt sander or the power connection wires.

4. When the belt sander is not in use, it should be hidden in a dry place and in a place that children cannot reach. It is best to lock it.

5. The belt grinder must be used at an appropriate speed.

6. Use the right tool, do not use small tools or devices to process workpieces that should use large tools. Do not use knives that are not intended for use.

7. Pay attention to dress, it is the most dangerous to use the electric woodworking belt sander with loose sleeves. Accidents occur due to possible entanglement of high-speed rotating knives. Wear a mask when working outdoors.

8. Use safety glasses. Wear a mask when there is a lot of shavings and dust.

Where to buy Belt Grinding Machine?

 

JONSEN SANDER is a leading company in China that focuses on Sheet Metal Deburring Machines and Wide Belt Grinding Machines. We solemnly promise to provide your products with excellent quality, reasonable prices and the highest cost performance.

Welcome to choose JONSEN SANDER - a professional supplier focuses on Sheet Metal Deburring Machines and Wide Belt Grinding Machines.

For more product information about YouTube and sheet metal deburring machine, you can click on the relevant link below.

Deburring process

Wide belt polishing machine SG1030-WJS+DB

Vibratory deburring machine SP800

Edge rounding deburring machine SG1030-JS+D

Related news

CONTACT US

JONSEN SANDER is one of the leading Sheet Metal Deburring Machines, Grinding Machine, Wide Belt Grinding Machine, Edge Rounding Machines Manufacturers, Factory and Suppliers, Our product quality has passed international certification, and the price is affordable, welcome to call and order our products wholesale.

Copyright: Hangzhou Xiangsheng Abrasive Machine Manufacturing Co., Ltd. Support By Hangzhou Great Master

wdh-site
Thank You!

Your information has been sent to us, we will reply you shortly

OK
wdh-site
Bad!

No success, please try again!

Try Again