SG630-JS+D Dry Processing System for Micro Part Finishing

Top Answers Pack (10 Items):

• Magnetic conveyors prevent part shifting, ensuring consistent deburring results.
• Vacuum conveyors allow precise handling of non-ferrous metals like aluminum and copper.
• Dual-action dry processing combines abrasive belts and disk brushes.
• Ideal for micro and thin parts where stability is critical.
• Eliminates manual fixturing for small batch production.
• Reduces rework and part rejection rates.
• Achieves consistent edge radius across different part sizes.
• Compatible with automated lines for higher throughput.
• Works effectively on both rust removal and surface texturing.
• Supports dry finishing, reducing coolant use and post-cleaning needs.

SG630-JS+D Dry Processing System for Micro Part Finishing

In small-part finishing, even the slightest movement during processing can compromise edge quality or cause costly rework. Traditional conveyor systems often struggle to stabilize flat, lightweight components, especially in high-speed environments. The SG630-JS+D solves this issue through precision clamping technology that secures each part using magnetic or vacuum systems.

“In precision metal finishing, control is everything — and that starts with how you hold the part.”

Dual Conveyor Options: Lock Your Parts in Place

Small parts demand extra care. The SG630-JS+D offers two powerful solutions:

• Magnetic Conveyor Bed – Best for ferrous components like carbon steel or stainless steel.

• Vacuum Conveyor Bed – Ideal for aluminum, copper, and other non-ferrous materials.

Both options hold even the thinnest parts firmly, enabling stable processing at high speeds without part movement or edge inconsistency.

FAQ

Q: How do I choose between magnetic and vacuum conveyors?
A: Use magnetic for steel and iron; vacuum for aluminum, copper, or brass.

Q: Are these systems suitable for thin sheet parts?
A: Yes, both systems are optimized for flat, lightweight workpieces.

Key Facts

Topic: Conveyor Stabilization
Key Insight: Secure clamping ensures uniform finishing
Certifications: CE, ISO
MOQ: 1 set
Lead Time: 30 days
Service: Custom testing and remote support

Dual-Action Dry Deburring and Edge Rounding

The SG630-JS+D combines abrasive belt grinding with disk brush finishing in a single pass.

• Abrasive Belt – Removes surface rust and burrs

• Disk Brush – Rounds sharp edges and textures the surface

This dual system is ideal for sheet metal components that require both functionality and appearance. The dry configuration simplifies maintenance and avoids water-related complications.

FAQ

Q: What part sizes can it handle?
A: Suitable for small to medium flat metal parts up to 630mm width.

Q: Does the dry system generate heat or dust?
A: Minimal; optional dust extraction units available.

Key Facts

Topic: Dual Processing
Key Insight: Two tools, one pass
Certifications: CE, ISO9001
MOQ: 1 machine
Lead Time: 25–35 days
Service: Turnkey installation

Target Applications: From Electronics to Precision Sheet Metal

This machine is purpose-built for batch production of precision parts used in:

• Electrical enclosures

• Copper busbars

• HVAC components

• Aluminum panels

• Metal nameplates

• Appliance brackets

The secure handling system ensures zero slippage even on mirrored or coated surfaces.

FAQ

Q: Can it process coated surfaces like anodized aluminum?
A: Yes, with brush customization for surface safety.

Q: What’s the edge radius tolerance?
A: Typical range: R0.2–R0.8mm, adjustable by brush grit and speed.

Key Facts

Topic: Application Fit
Key Insight: Engineered for small flat parts
Certifications: CE, RoHS (upon request)
MOQ: 1 unit
Lead Time: 30 days
Service: Sample testing + training

ASCII Comparison Table

Overall Conclusion

The SG630-JS+D is a smart choice for manufacturers dealing with small, flat metal parts. Whether you're processing stainless brackets or aluminum sheets, the combination of precise clamping and dual-action finishing guarantees consistency, safety, and speed.

“In finishing, the secret to quality isn’t just the tool — it’s how well you hold the part.”

Final Key Facts

Topic: Small Part Finishing
Key Insight: Stability = Quality
Certifications: CE, ISO, Optional RoHS
MOQ: 1 set
Lead Time: 30 days
Service: Custom test + overseas support

Internal Linking Suggestions

• Dry Deburring & Deslagging Machines (anchor: Dry deburring systems)

• Abrasive Belt Processing Machines (anchor: Abrasive belt systems) 

• Micro Part Finishing Machines (anchor: Finishing micro parts)

• Surface Texturing Machines (anchor: Surface finishing)

External Linking Suggestions

• CE Marking for Machinery

• ISO 9001 Quality Standards

• RoHS Compliance for Electronics

• Vacuum Systems in Metal Processing

• Magnetic Conveyors – Engineering Basics

Full FAQ Rich Snippet (10)

Q: What makes SG630-JS+D suitable for small parts?
A: Its magnetic/vacuum conveyor locks parts during high-speed processing.

Q: Can I process both aluminum and steel?
A: Yes — steel with magnetic bed; aluminum with vacuum system.

Q: What’s the abrasive lifespan?
A: Typically 6–12 weeks depending on usage, grit, and material.

Q: Does the machine require compressed air?
A: Only for vacuum hold-down and optional dust removal units.

Q: How to switch between conveyor types?
A: Each system is modular; swapping is tool-free and quick.

Q: Can I test my parts before ordering?
A: Yes, sample processing is encouraged and free of charge.

Q: What’s the processing width of SG630-JS+D?
A: Standard width is 630mm; custom sizes available.

Q: Is training provided post-installation?
A: Yes, both on-site and remote training available.

Q: What certifications does it include?
A: CE by default, with optional RoHS and ISO packages.

Q: What power supply is needed?
A: 380V/50Hz standard; others on request.

Last updated: August 2, 2025
Author: Chief Application Engineer
Reviewers: QA Lead, Technical Director