What should be paid attention to in the operation of magnetic deburring machine

　　The magnetic deburring machine requires professional operation, so what should be paid attention to?

　　1. Before polishing, be sure to clean up the grease on the surface of the workpiece. The polishing fluid cannot remove a large amount of grease, otherwise the workpiece, polishing needle, water, and polishing bucket may become black.

　　2. Cleaning liquid must be used when cleaning polishing needles and polishing barrels.

　　3. Water is leaking in the polishing bucket, and there is a polishing needle on the bottom thorn, which can be removed with pliers, and a little glue is added.

　　4. The timer does not flash. If the start switch is not pressed, the timer can be timed.

　　5. Please change the water in time when the water in the polishing bucket is overheated (normal water temperature range is controlled within 50°C)

　　6. The machine shakes a lot, check whether each corner of the machine is in the force position, and adjust the length of the foot cup

　　7. The indication is normal, but the machine does not work, check whether the voltage is lower than 220V; whether the polishing needle is placed excessively

　　JONSEN SANDER is a professional equipment manufacturer integrating R&D, manufacturing and sales. The company's main business: Sheet Metal Deburring Machines, Grinding Machine, Wide Belt Grinding Machine, Edge Rounding Machines and other equipment, which are widely used in electrical enclosures and accessories, railway transportation equipment, nuclear energy, friction materials, aerospace, automotive parts, medical equipment, and Precision electronics and other fields.

　　China sheet metal deburring machines

　　Wide Belt Grinding Machine